Hyundai IX35 Rear View Camera IX35 Back Up Camera

Hyundai IX35 Rear View Camera IX35 Back Up Camera

How to Install hyundai ix35 reverse camera:

a. Take out your stock license plate light at the back of your car.

b. Fix the camera to where the stock license plate light was.

c. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power

d. Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative.

e. Connect the video cable of the camera to the extension cord.

f. Connect the extension cord to your car monitor.

g. You will see the images when your car is in reverse shift.
 

Specifications:

Image Sensor: PC1030N
TV System: PAL/NTSC
Effective Pixels: 648*488pixels
Sensing Area: 5.55um*5.55um
Scanning System: 2:1 interlace
Sync System: Internal
Resolution: 420 TV Lines
Horizontal Sync, Frequency: 15.625KHz/ 15.734KHz
Vertical Sync, Frequency: 50Hz/60Hz
Minimum illumination: 1.5lux/ F1.2
Video output: 1.0PP. 750hm
Gamma Consumption: 0.45
AGC: Auto
S/N ratio: Better than 48Db
White balance: Auto
Electronic Shutter: 1/60~1/15.000 Seconds
BLC: Auto
Current Consumption: 80Ma
Power supply: DC 12V
Operating Temperature: -10~46 RH95% MAX
Lens: 1.8mm E=2.0
Lens Angle: 170
Waterproof Grade: IP 67
Dimension: 18mmx23mm
Cable Length: 8 meter extension cable